Phresh HyperFan - V2
Phresh HyperFan - V2
Looking for an environmentally friendly and efficient way to control the temperature and humidity in your hydroponic garden?
Look no further than Phresh Hyperfans!
These powerful fans use half of the power and produce half of the heat of traditional EC and DC fans, making them much more environmentally friendly.
The Hyperfan is the next generation of inline fans. It's much improved 0-10 V motors provide seamless, speed adjustment from a complete stop (0 rpm) up to full power without any droning or motor degradation.
Fan blade balance has also been refined to near perfect tolerances which reduces air noise and increases bearing life.
New steel housings increase fan strength and integrity. Detachable speed controllers come with every fan and connect/disconnect easily via the new and improved RJ14 ports.
Supplied with 5 meters of RJ14 cable. Controller cables can now be extended up to 12 metres if required.
With Phresh's handy speed and temperature controllers, you can easily adjust the settings to create the perfect growing environment for your plants.
For green house/grow room design static pressure is the most important factor in ventilation.
Simply put, static pressure refers to the airflow resistance of the components and duct work in a ventilation system.
The air pressure must be greater than the resistance to the flow. The higher the fans static pressure rating (Pa) the greater its ability to remove either hot or stale air from the environment.
Hyperfan V2 ™ has this covered with the highest static pressures of any fan type.
Features
- New 9 pole digital EC "brush-less" motors
- EC digital brushless motors are quieter, operate at lower temperatures, energy efficient and reliable
- Higer fan efficiency @ 7.85 CFM per watt
- Higher linear air flow output than other fans
- High Pressure Laminar Air Flow/Taper Blade & Stator Technology
- Detachable fully variable speed controller included with each fan
- Sturdy steel housing and Abec 7 ball bearings
- 0 - 10V controller compatible via RJ9 or RJ11 cable
- Compatible with Climate Control V2 (sold separately)
125 mm HyperFan V2
The new 125 mm HyperFan V2 raises the bar for small room extraction fans with a whopping static pressure of 475 Pa and an airflow rating of 350 m3/h (100 L/s). Capable of venting up to 1000 W of lighting while operating restrictive carbon filter/ducting systems. The 125 mm Hyperfan V2 uses a miniscule 27 W @ 0.25 A. A remote speed controller with 5 metre cable is included, which can reduce fan RPM to a complete stall without vibration or motor damage. The outer housing is 125mm Ø, ensuring that this fan can slide into even the smallest of spaces. Weighing in at only 1.6 kg it can be easily mounted and supported in even the lightest duty propagation tent. 100 mm fan reducer collars are also available. Lift your ventilation game, save power and reduce the heat in your small room/grow tent with 125 mm HyperFan V2.